Cermet ruwan wukake ba kawai bukatar samun high taurin da high tauri a matsayin tushe abu, amma kuma tsananin aiwatar da dacewa ingancin nagartacce a cikin m samar matakai na biyu-karshen surface nika, Ramin nika da baki passivation, don samar da m da high- samfurori masu inganci.samfur.
Dukanmu mun san cewa ana iya sanin daidaiton matakin ruwa daga samfurin ISO ruwa, don haka a yau za mu fara gabatar da abun ciki da ke da alaƙa da daidaiton girman madaidaicin ruwa na ISO.
Misali, samfurin ruwan sama shine TPGH110304L10PK C3
Harafi na uku G yana tsaye ne don daidaito, wanda shine madaidaicin matakin niƙa mai ban sha'awa.
| Lambar | Haƙuri tsayin kayan aiki M (mm) | Haƙurin da'irar da aka rubuta IC (mm) | Hakuri mai kauri S (mm) |
| A | ± 0.005 | ± 0.025 | ± 0.025 |
| F | ± 0.005 | ± 0.013 | ± 0.025 |
| C | ± 0.013 | ± 0.025 | ± 0.025 |
| H | ± 0.013 | ± 0.013 | ± 0.025 |
| E | ± 0.025 | ± 0.025 | ± 0.025 |
| G | ± 0.025 | ± 0.025 | ± 0.13 |
| J | ± 0.005 | ± 0.025 | ± 0.025 |
| K* | ± 0.013 | ± 0.05-± 0.15 | ± 0.025 |
| L* | ± 0.025 | ± 0.05-± 0.15 | ± 0.025 |
| M* | ± 0.08-± 0.18 | ± 0.05-± 0.15 | ± 0.13 |
| N* | ± 0.08-± 0.18 | ± 0.05-± 0.15 | ± 0.025 |
| U* | ± 0.13-± 0.38 | ± 0.08-± 0.25 | ± 0.13 |
* Yana nuna ruwan wukake wanda gefensa baya kasa
Lokacin aikawa: Fabrairu-08-2023
